Plyneer Calibrated B.W.R. Water Resistant Plywood - 15 Years Replacement Guarantee*

Rs. 35.75
Rs. 1208 Rs. 1144 / sheet (* GST 18% is Applicable)

Plyneer Calibrated

BWR Grade Plywood is Boiling Water Resistant Plywood. It is manufactured using rotary peeled smooth veneer. The veneers are tightly cut and bonded using synthetic compounded phenol formaldehyde resin. BWR ISI 303 grade is bonded with improved and indigenously compounded phenol formaldehyde synthetic resin under controlled temperature and pressure. The tough treatment given to this B.W.R grade plywood makes it sturdy in which the Veneers are treated with preservatives. Glue line is fused with chemicals for borer and termite protection, while the finished panels are treated with acid copper chrome and boric acid compound. BWR Plywood does not swell even after it is immersed in hot water for 8 hours boiling and therefore is ideal to be used at hot, humid and moist locations. The result is a high quality ply that can resist boiling water, cold water, climate variations including termite and borer attacks.



Prescribed Test- ISI 303


          Observed Value

Moisture Content (%)


               10 - 5

Modulus of Elasticity (N/mm2)

       5000- 5500                             


Modulus of Rapture (N/mm2)                

          50- 55                                   


Water Absorption (%)                                 



Screw Holding Strength(Kgs)                  

            Min  80


Nail Holding Strength(Kgs)

            Min 50


Squareness Test (%)                            



Edge Straightness Test (%)

         0.2- 0.6                                   


  • Prices and product availability are subject to change without notice.
  • Actual products may differ slightly in appearance to image shown.
  • The prices mentioned below are of actual thickness, for ex: 7MM means thickness is guaranteed 7+ MM

Contact Us

  Leave your testimonial